DIY Glitter Phone Case

Prada Your Phone: DIY Decoupage Phone Case Tutorial

DIY Decoupage Phone Case Tutorial
DIY Decoupage Phone Case tutorial by Rain Blanken

DIY Decoupage Phone Case Tutorial

I was recently challenged to create a killer glitter phone case tutorial for About.com. But what is there to a glitter phone case tutorial? Add glitter to glue, then apply to phone case. Let dry. Not exactly the most informative or exciting read. Instead, I added a decoupage element to my case that adds this season’s hottest Prada, Louis Vuitton, and Pierre Hardy patterns to my phone case.. without the designer price tag.

Ingredients:

DIY Decoupage Phone Case Tutorial
Everything you’ll need to refashion your phone case. Just like Anna Wintour intended?
Decoupage Phone Case
Cutting up Vogue for the sake of my own fashion.

The phone case was my blank canvas, so right away, I set out on an inspirational hunt through Vogue. I cycled through what I call The Three Stages of Vogue Readership, and came out the other side with lots of inspiration.

Mixing Glitter Glue
Wasting glitter should be a federal offense.

There are more than a few glitter-glue tutorials online, but I have to disagree with most of them. They are always carting out a big ol’ bowl of glitter that poses nicely for photos, but isn’t very practical. We’re only painting a phone case, here, so I don’t need a lot of glitter-glue. Put a dollap on a tupperware lid next to a nearly-equal pile of glitter.

I even used just a blob of glue, then mixed white glitter into one side of the blob, and my other glitter colors into the other sides of the blob. Stop wasting glitter, internet!

Apply the glitter-glue to the phone case, starting with light colors first.


Working with the lightest colors first will make mistakes much easier to fix.

Here is what the dried first layer will look like:

DIY Glitter Phone Case
Let dry overnight. Here is what the first layer of dried glitter looks like.

Not quite solid coverage, so we’ll hit it with another coat:

DIY Glitter Phone Case
Push the second layer of glitter onto the first, filling in any gaps.

The second coat is more about filling gaps. Use a stiff brush to push the grainy glitter mix in there like you’re filling holes in concrete. I’ve never done that before, but this is how I picture it. Don’t let this layer dry before applying your magazine cut-outs.


Now that my ‘beach’ is in place, I can start adding my magazine cut-outs. I put a bit more glue on the spots where I was going to place my pieces, because the glitter-glue was still bumpy. I also swiped the back of each cut-out with glue. Push these into the wet glitter-glue a bit to sink them in.

Let this dry completely, then come back and add a coat of decoupage glue to the tops of your cut-outs, and about 1/8″ away from them. The goal here is to create a seal around each piece. Let dry, then add a second coat. If you’re particularly rough on your phone cases, come on back for round three. Let dry at least two days before you use your phone case.

DIY Glitter Phone Case
Rain Blanken’s finished decoupage glitter phone case.

Leave a Reply

Your email address will not be published. Required fields are marked *